nylon resins

NYLON
245

A low viscosity nylon 6 homopolymer, suitable for injection molding and compounding applications. It exhibits excellent melt flow properties, reduced cycle times, and offers good strength, stiffness, and toughness as well as excellent heat, chemical and abrasion resistance. Detailed technical data sheets for each of our products are available upon request.

Properties Test Method Unit Values
Viscosity, FAV ASTM D-789 36
Viscosity 96% SAV 1% Polymer solution in H2SO4 of 96% @ 20°C 2.45
Moisture Content Karl Fisher Method % Max 0.10
Monomer Content Hot water extraction method % Max 1.00
Amino Ends(Terminated) meq 38-50
Melting Point ASTM D-3418 °C 225
Specific Gravity ASTM D-792 g/cm 1.13
Forms Granulate

Product is supplied in sealed, nitrogen-filled containers and drying prior to processing is not required. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80° C (176° F) is recommended. Drying time is dependent upon moisture level. Further information concerning safe handling procedures can be obtained from the Material Safety Data Sheet or by contacting your Beaulieu representative.

Although the statements, information and data provided in this document are believed to be accurate, they are presented as guidance only, without guarantee, warranty or responsibility of any kind, express or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement, and are not suggestions to infringe any patent. User should not assume that all safety measures are indicated, or that other measures may not be required. Further information concerning safe handling procedures can be obtained from the Material Safety Data Sheet or your Beaulieu representative.

nylon resins

NYLON
260

A low/medium viscosity nylon 6 homopolymer, suitable for injection molding and compounding applications. It exhibits excellent melt flow properties, reduced cycle times, and offers good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance. Detailed technical data sheets for each of our products are available upon request.

Properties Test Method Unit Values
Viscosity, FAV ASTM D-789 47
Viscosity 96% SAV 1% Polymer solution in H2SO4 of 96% @ 20°C 2.60
Moisture Content Karl Fisher Method % Max 0.10
Monomer Content Hot water extraction method % Max 1.00
Amino Ends(Terminated) meq 32-48
Melting Point ASTM D-3418 °C 225
Specific Gravity ASTM D-792 g/cm 1.13
Forms Granulate

Product is supplied in sealed, nitrogen-filled containers and drying prior to processing is not required. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80° C (176° F) is recommended. Drying time is dependent upon moisture level. Further information concerning safe handling procedures can be obtained from the Material Safety Data Sheet or by contacting your Beaulieu representative.

Although the statements, information and data provided in this document are believed to be accurate, they are presented as guidance only, without guarantee, warranty or responsibility of any kind, express or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement, and are not suggestions to infringe any patent. User should not assume that all safety measures are indicated, or that other measures may not be required. More information concerning safe handling procedures can be obtained from the Material Safety Data Sheet or your Beaulieu representative.

nylon resins

NYLON
280

A medium viscosity nylon 6 homopolymer that is well suited for compounding, mono and multifilament applications as well as carpet fiber and synthetic turf. Detailed technical data sheets for each of our products are available upon request.

Properties Test Method Unit Values
Viscosity, FAV ASTM D-789 57
Viscosity 96% SAV 1% Polymer solution in H2SO4 of 96% @ 20°C 2.78
Moisture Content Karl Fisher Method % Max 0.14
Monomer Content Hot water extraction method % Max 1.00
Amino Ends(Terminated) meq 38-50
Melting Point ASTM D-3418 °C 220
Specific Gravity ASTM D-792 g/cm 1.13
Forms Granulate

Product is supplied in sealed, nitrogen-filled containers and drying prior to processing is not required. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80° C (176° F) is recommended. Drying time is dependent upon moisture level. Further information concerning safe handling procedures can be obtained from the Material Safety Data Sheet or by contacting your Beaulieu representative.

Although the statements, information and data provided in this document are believed to be accurate, they are presented as guidance only, without guarantee, warranty or responsibility of any kind, express or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement, and are not suggestions to infringe any patent. User should not assume that all safety measures are indicated, or that other measures may not be required. More information concerning safe handling procedures can be obtained from the Material Safety Data Sheet or your Beaulieu representative.

nylon resins

NYLON
310

A medium viscosity nylon 6 extrusion grade homopolymer for cast or blown film. It conforms to FDA requirements of 21 CFR 177.1500 and possesses the combination of strength, toughness and thermoforming properties associated with nylon 6 as well as excellent heat, chemical and abrasion resistance. Detailed technical data sheets for each of our products are available upon request.

Properties Test Method Unit Values
Viscosity, FAV ASTM D-789 36
Viscosity 96% SAV 1% Polymer solution in H2SO4 of 96% @ 20°C 3.10
Moisture Content Karl Fisher Method % Max 0.10
Monomer Content Hot water extraction method % Max 1.00
Amino Ends (Non-Terminated) meq 38-50
Melting Point ASTM D-3418 °C 225
Specific Gravity ASTM D-792 g/cm 1.13
Forms Granulate

Product is supplied in sealed, nitrogen-filled containers and drying prior to processing is not required. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80° C (176° F) is recommended. Drying time is dependent upon moisture level. Further information concerning safe handling procedures can be obtained from the Safety Data Sheet or by contacting your Beaulieu representative.

Although the statements, information and data provided in this document are believed to be accurate, they are presented as guidance only, without guarantee, warranty or responsibility of any kind, express or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement, and are not suggestions to infringe any patent. User should not assume that all safety measures are indicated, or that other measures may not be required. More information concerning safe handling procedures can be obtained from the Material Safety Data Sheet or your Beaulieu representative.